Docomo FOMA P701iD, Manual

Page: 171 / 580

169
Camera
<Finder display>
<Detailed display>
You can use a camera to automatically or manually take a continuous shot of a still image. The image sizes
that you can set are CIF (352 x 288), Stand-by (240 x 320), QCIF (176 x 144), and Sub-QCIF (128 x 96). See
“Interval/Number” for how to set the number of shot or the shooting interval for auto-continuous shooting.
Continuous Shooting
Camera
The Camera menu is displayed.
●
Press from the Stand-by display to start up the camera in Photo Mode. Go to step 3.
●
You can start up the camera in Photo Mode also by selecting from the Shortcut menu and
pressing . Go to step 3.
1
Photo mode
“ ” is displayed.
2
Continuous mode Auto or Manual
●
You can switch to Continuous Mode also by selecting “Continuous mode” from “CHG camera-mode” in
the Function menu and pressing .
●
Select “Manual” to display the number of frames for continuous shooting.
3
Press .
Continuous shooting starts.
If you select “Manual” in step 3, press the number of times of shooting frames. Not to shoot all frames, press .
●
The image appears horizontally flipped (mirrored) when you take a shot with the inside camera; however the image is
correctly displayed when playing back.
● When “Auto save set” is set to “ON”, the images are automatically saved. Go to step 8.
4
Select a still image ( )
●
Press from the detailed display to bring up the previous or
following still image.
●
Each time you press on the Post View display, “ ” is displayed
and you can select the still image.
●
Press from the Post View display and the confirmation display
appears asking whether to cancel the shot still image. Select “YES” or
“NO” and press .
5
YES
The selected still image is saved.
●
When “Store in” is set to “miniSD”, the still image is saved to the folder selected by “Select storage”. When unsaved still
images are found, the confirmation display appears asking whether to save them. Select “YES” and press to save all the
still images. To cancel, select “NO” and press . Go to step 8.
●
See page 173 for “Store selection” and “Store all”.
6
Select a destination folder
●
When unsaved still images are found, the confirmation display appears asking whether to save them. Select “YES”, press
, and select a destination folder; then press to save all the still images. To cancel, select “NO” and press .
●
See page 344 for still image folders.
7
Press or to end the camera.
●
See page 345 for how to display saved still images.
8
<Post View display>
<Camera menu>
■
Post View display
“Post View display” enables you to check still or moving images you shot before they are saved.