Docomo FOMA P701iD, Manual

Page: 161 / 580

159
Safety
Settings
Checking/Releasing Restrictions on Phonebook Entries
<Restrictions display>
●
You cannot set while another function is working.
●
You cannot set Restrictions for the Phonebook entries stored in “Secret mode” and “Secret only mode” and in the UIM Phonebook.
●
If you activate “PIM lock” while “Restrict dialing” is set, you cannot dial at all.
●
If you activate “PIM lock” while “Call rejection” or “Call acceptation” is set, you can accept all incoming calls.
●
Note that the setting is released if you change or delete the phone number set with “Call rejection” or “Call acceptation”.
● “Restrict dialing” disables the following functions; retrieving non-specified phone numbers, storing/editing Phonebook entries,
storing/editing voice dial entries, copying data to the UIM, and dialing from the keys and received call records including the specified
phone numbers.
●
If you set “Restrict dialing”, the data items in Redial, Dialed Calls and Sent Address up to that point are all deleted. Dialed records
after you set “Restrict dialing” remain.
●
To simultaneously activate “Restrict dialing” and “Automatic display”, set “Restrict dialing” for the phone number set with “Automatic
disp.”. “Automatic display” does not work unless “Restrict dialing” is set.
●
You can make emergency calls at 110/119/118 even if you set “Restrict dialing”.
●
You can make calls even if you set “Call rejection” or “Call acceptation”.
●
When a call comes in from the phone number set with “Call rejection”, or from other than the phone number set with “Call
acceptation”, the call is stored in “Received calls” as a “Missed call” and the icon of “Missed call” appears on the Stand-by display.
Also, the caller hears a busy tone even if you have set Voice Mail Service or Call Forwarding Service to “Activate”. However, if you
set the ringing time for Voice Mail Service or Call Forwarding Service to 0 seconds, or when the FOMA phone is out of the service
area, or when the power is turned off, the caller does not hear a busy tone, and Voice Mail Service or Call Forwarding Service works.
Note that in this case the record is not stored in “Received calls”, and the icon of “Missed call” does not appear on the Stand-by
display.
●
You can receive SMS messages or i-mode mail regardless of the setting of “Call rejection” or “Call acceptation”.
●
You cannot simultaneously activate “Call rejection” and “Call acceptation” for the same phone number stored in the Phonebook.
Information
Restrictions Enter your Terminal Security Code
Restrict dialing···········See page 158
Call rejection ··············See page 158
Call acceptation ·········See page 158
Call forwarding···········See page 452
Voice mail ···················See page 449
●
The set item is indicated by “
★
”.
●
See page 148 for the Terminal Security Code.
1
Select a Phonebook entry
The phone number set with Restrictions is displayed.
●
To release “Restrictions” per phone number, select the phone number you want to release by following the same steps above
and press . You can release Restrictions by selecting “YES” and press from the confirmation display asking whether
to release. To cancel, select “NO” and press .
2