Docomo FOMA P701iD, Manual

Page: 122 / 580

120
Tone/Display/Light
Setting
● You cannot set the ring tone for “Group 00” or for groups in the UIM.
●
Note that the setting for “Ring tone” of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request”
in advance.
●
To change the set ring tone, release the current setting and proceed.
●
If you store the same phone number or mail address in multiple groups, the ring tone set for the group of the phone number or mail
address initially accessed by Column Search has priority.
●
You can set this function for either the group in which secret and ordinary Phonebook entries are stored together or the group in
which only secret entries are stored; however this function is disabled if you receive a call or mail from the secret entry. In this case,
the ring tone sounds according to the setting of “Select ring tone”.
●
Use “Utilities” to check which group is set, or to release the setting.
Information
You can set a ring tone for each group of the FOMA phone’s Phonebook.
If you have set the ring tone by phone number or mail address, that setting has priority.
Group setting Select a group ( ) Utilities
Ring tone ····················Sets a ring tone or i-motion movie for incoming voice calls or video-phone calls by group.
Mail ring tone ·············Sets a ring tone or i-motion movie for incoming i-mode mail messages or SMS messages by
group.
Go to step 3 on page 119.
The set item is indicated by “
★
”.
●
To release the ring tone for the group, perform the same operation.
1
Set by Group
You can select whether to add a natural, stereophonic sound effect for the playback of i-motion movies.
Incoming call Sound effect i-motion stereo
ON··············Adds sound effects.
OFF············Does not add sound effects.
1
<Sound Effect>
Setting at purchase
OFF
Setting Sound Effects of Ring Tone or Melody