Docomo FOMA P701iD, Manual

Page: 47 / 580

45
Confirming
before
Use
Charge with AC Adapter and Desktop Holder
Connect the AC Adapter (option) to the Desktop
Holder (option).
1
Insert the AC Adapter’s plug into a power socket.
2
Set the FOMA phone onto the Desktop Holder.
Push it until it clicks.
Check that the Call/Charging indicator lights in red.
When the Call/Charging indicator flickers, dismount the AC adapter and battery
pack from the FOMA phone and then re-mount them for charging. If the symptom
persists, troubles with the AC Adapter, Desktop Holder or battery pack may be
involved, so consult a handling counter such as a DoCoMo shop.
●
Attach the battery pack to the FOMA phone beforehand.
●
Be sure to set the FOMA phone firmly onto the Desktop Holder. Also, be
careful that the connector cap or a commercial strap is not caught between the
FOMA phone and Desktop Holder.
●
Charging can be done even while the FOMA phone is open.
3
When charging completes, take the FOMA
phone off the Desktop Holder.
●
Unplug the AC Adapter from the power socket when you are not going
to use it for a long time.
4
Desktop Holder P09
FOMA AC Adapter 01
100 VAC
●
Be careful that you do not install the FOMA phone onto the desktop holder with the bottom inserted first, or the direction of the FOMA
phone set upside down. Otherwise, you might damage the FOMA phone.
●
You can take calls even during charging when the power is turned on. (Charging will take longer in this case.)
●
If the power is turned on, the “Charge sound” beeps at the volume set for “Phone” of “Ring volume” when charging starts and ends.
(See page 124)
●
The FOMA AC Adapter 01 uses 100 VAC only.
●
You cannot charge the battery pack by itself. The battery pack must be attached to the FOMA phone for charging.
● If the fuse blows off when charging with the DC Adapter, be sure to use a 2A fuse. The 2A fuse is consumables, so purchase at auto
parts stores in your neighborhood.
●
When using only the AC adapter for charging, insert the connector with its surface facing correctly and in a right angle. You can
smoothly mount it without inserting forcibly. If it does not work, check the shape or facing direction of the connector.
If you forcibly insert the connector, damage to the connector could result.
Information
Plug horizontally
with engraved
side facing down
■ DC Adapter (option)
With the DC Adapter, you can use a cigarette lighter socket (12 V/24 V) to charge the FOMA phone with
the battery pack attached.
Read the manual for the FOMA DC Adapter 01 for details.
Call/Charging indicator “ ” display
Charging Lights in red ※ Blinks
Charging completed Lights in green (one time only) ※ Lights
■
Indicator and display during charging and when charging is
completed
● When the FOMA phone is turned off, “ ” does not appear.
If you start charging with the battery flat, the Call/Charging indicator might not
light immediately; however, charging itself has started.
※
The light of Call/Charging indicator glows slowly bright or dim, and wavers.
The Call/Charging indicator
(lights in red)
②
①
■
Charge with the AC Adapter only
Insert the connector with the engraved surface
facing up until it clicks. Pull straight the connect out
while pressing the release buttons.
＊
Check the facing direction (surface or rear) of
the AC adapter plug and then insert or pull it
horizontally into or from the FOMA phone.
Engraved surface
Release buttons