Docomo FOMA P701iD, Manual

Page: 496 / 580

494
Data
Transmission
AT command Outline Parameter/Explanation Command execution example
AT
＊
DGPIR= n
[M]
AT
＊ DRPW
[AT][M]
+++
[M]
AT+CEER
[M]
AT+CGDCONT
[M]
AT+CGEQMIN
[M]
AT+CGEQREQ
[M]
AT+CGMR
[M]
AT+CGREG=
n
[M]
[&F][&W]
AT+CGSN
[M]
AT+CLIP=
n
[AT][M]
[&F][&W]
This command is valid at
outgoing and incoming calls.
In the dial-up network setting,
you can add “186” (notified) or
“184” (not notified) to the phone
number of the access point.
(See page 482)
Displays the output power index
for receiving.
(0: minimum value to
75: maximum value)
Changes to the online command
state without disconnecting the
line when the escape sequence
is executed in the online mode.
Displays the reason why the
preceding call was
disconnected.
Sets the connecting end (APN)
at packet transmission.
Registers the reference value to
decide whether the system
permits QoS (Quality of Service)
reported from the network at
establishment of PPP packet
transmission.
Sets QoS (Quality of Service) to
be requested to the network at
issuance of the PPP packet
transmission.
Displays the version of the
FOMA phone.
Sets whether the network
registration state is notified.
Displays whether you are inside
or outside the service area
depending on the returned
notification.
Displays the serial number of
the FOMA phone.
Enables to display the caller’s
ID on the personal computer at
reception for 64K data
transmission or
video-phone calls.
n =0: Uses the APN as it is. (Setting at purchase)
n =1: Adds “184” to the APN. (Always not notified.)
n =2: Adds “186” to the APN. (Always notified.)
AT ＊ DGPIR?: Displays the current setting.
−
−
<report>
Disconnection reason list (See page 498)
See page 498.
AT+CGEQMIN=[parameter]
See page 498.
AT+CGEQMIN=?
Lists the settable values.
AT+CGEQMIN?
Displays the current setting.
AT+CGEQREQ=[parameter]
See page 498.
AT+CGEQREQ=?
Lists the settable values.
AT+CGEQREQ?
Displays the current setting.
−
n =0: Not notified. (Setting at purchase)
n =1: Notified at switching between the inside and
outside of the service area.
(Inquiry)
AT+CGREG?
+CGREG: <n>,<stat>
n : Set value
stat:
0: Outside packet area
1: Inside packet area
4: Unknown
5: Inside packet area (during roaming)
−
n =0: Does not notify. (Setting at purchase)
n =1: Notifies.
result: +CLIP: <n>,<m>
m =0: NW setting not to notify a caller ID at dialing
m =1: NW setting to notify a caller ID at dialing
m =2: Unknown
AT
＊
DGPIR=0
OK
AT
＊
DGPIR?
＊
DGPIR:0
OK
AT ＊ DRPW
＊
DRPW:0
OK
−
AT+CEER
+CEER:36
OK
See page 498.
See page 498.
See page 498.
AT+CGMR
1234512345123456
OK
AT+CGREG=1
OK
(set to “Notified”)
AT+CGREG?
+CGREG:1,0
OK
(means the outside of the
service area)
(at moving from the outside to
the inside of the service area)
+CGREG: 1
AT+CGSN
123456789012345
OK
AT+CLIP=0
OK
AT+CLIP?
+CLIP:0,1
OK