Operation & Maintenance Manual
Section1-Safety Precaution
Dingli Machinery
1-3
Workplace Inspection
The operator is to take safety measures to avoid all hazards in the work area prior to
machine operation.
Do not operate or raise the platform while on trucks, trailers, railway cars, floating
vessels, scaffolds or other equipment.
Do not operate the machine in hazardous environments unless approved for that purpose
by Dingli.
Be sure that the ground conditions are able to support the maximum load shown on the
decals located on the machine.
This machine can be operated in temperatures of -20
℃
to 40
℃
. Consult Dingli for
operation outside this range.
Machine Inspection
Before machine operation, perform inspections and functional checks. Refer to
Section 3
of this manual for detailed instructions.
Do not operate this machine until it has been serviced and maintained according to
requirements specified by the manufacture.
Be sure the footswitch and all other safety devices are operating properly. Modification of
these devices is a safety violation.
MODIFICATION OR ALTERATION OF AN
AERIAL WORK PLATFORM SHALL BE MADE
ONLY WITH WRITTEN PERMISSION FROM
THE MANUFACTURER
Do not operate any machine on which safety or
instruction placards or decals are missing or illegible.
Avoid any buildup of debris on the platform floor.
Keep mud, oil, grease, and other slippery substances
from footwear and platform floor.
1.4 OPERATION
General
Do not use the machine for any purpose other than positioning personnel, their tools, and
equipment.
Never operate a machine that is not working properly. If a malfunction occurs, shut down
the machine for troubleshooting.
Never slam a control switch or lever through neutral to an opposite direction. Always
return switch to neutral and stop before moving the switch to the next function. Operate
Summary of Contents for BA14J-AWD
