DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 70 / 97

Operation & Maintenance Manual Section6-Emergency Operation
Dingli Machinery
6-3
3) Operate appropriate control switch or controller for desired function and hold.
4) Position AUXILIARY POWER switch to ON and hold.
5) Release AUXILIARY POWER switch, and appropriate control switch or controller.
6) Position POWER/EMERGENCY STOP switch to OFF.
WHEN OPERATING ON AUXILIARY POWER, DO NOT OPERATE
MORE
THAN ONE FUNCTION AT THE SAME TIME.
SIMULTANEOUS OPERATION CAN OVERLOAD THE AUXILIARY
PUMP MOTOR.
6.4 Emergency Operation
Use of Ground Controls
KNOW HOW TO USE THE GROUND CONTROLS IN AN EMERGENCY
SITUATION.
Ground personnel must be thoroughly familiar with the machine operating characteristics and
the ground control functions. Training should include operation of the machine, review and
understanding of this section and hands-on operation of the controls in simulated
emergencies.
Operator Unable to Control Machine
If the Platform Operator Is Pined, Trapped or Unable to Operate or Control the
Machine
DO NOT OPERATE WITH PRIMARY POWER SOURCE (ENGINE OR
ELECTRIC MOTOR) IF PERSONS ARE PINNED OR TRAPPED. USE
AUXILIARY POWER INSTEAD.
1)
Operate the machine from ground controls ONLY with the assistance of other personnel
and equipment (cranes, overhead hoists, etc.) as may be required to safely remove the
danger or emergency condition.
2)
Other qualified personnel on the platform may use the platform controls with regular or
auxiliary power.
DO NOT CONTINUE OPERATION IF CONTROLS DO NOT
FUNCTION NORMALLY.
3)
Cranes, forklift trucks or other equipment which may be available are to be used to
remove platform occupants and stabilize motion of the machine in case machine controls
are inadequate or malfunction when used.
Platform or Boom Caught Overhead