Operation & Maintenance Manual Section4-Machine Controls and Indicators
Dingli Machinery
4-14
7
Warning Indicator, it would be display once the engine oil
pressure is too low.
4.3
Tilt Alarm Warning
A Tilt Sensor is installed in the Turntable, which is used to detect if the chassis is in horizontal.
Once the Tilt Sensor detects that the chassis is inline and the inline degree is more than 3
degree, the sensor indicator light would turn to be red from green and an alarm will also
sound. When the chassis is on a slope and the boom is above horizontal, if lit when boom is
raised or extended, retract and lower to below horizontal then reposition machine so that it is
level before continuing operation. If the boom is above horizontal and the machine is on a
slope, the tilt alarm will sound and the Main Boom Raising and Extending would be not
function.
TILT WARNING LIGHT IS ILLUMINATED WHEN BOOM IS RAISED
OR EXTENDED, RETRACT AND LOWER TO BELOW HORIZONTAL
THEN REPOSITION MACHINE SO THAT IT IS LEVEL BEFORE
EXTENDING BOOM OR RAISING BOOM ABOVE HORIZONTAL.
4.4 Footswitch/Enable Indicator
To operate any function, the footswitch must be depressed and the function selected within
seven seconds. If a function is not selected within seven seconds, or if a seven second lapse
between ending one function and beginning the next function, the enable function would go
out and the footswitch must be released and depressed again to enable the controls.
NOTE: For engine starting, the footswitch must be in the released (up) position.
Summary of Contents for BA14J-AWD
