DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 24 / 97

Operation & Maintenance Manual
Section3-User Responsibility, Machine
Preparation, and Inspection
Dingli Machinery
3-1
User responsibility,
Machine Preparation, and Inspection
3.1 PERSONNEL TRAINING
The aerial platform is a personnel handling device; so it is necessary that it be operated and
maintained only by trained personnel.
Persons under the influence of drugs or alcohol or who are subject to seizures, dizziness or
loss of physical control must not operate this machine.
Operator Training
Operator training must cover:

Use and limitations of the controls in the platform and at the ground, emergency controls
and safety systems.

Control labels, instructions, and warnings on the machine.

Rules of the employer and government regulations.

Use of approved fall protection device.

Enough knowledge of the mechanical operation of the machine to recognize a
malfunction or potential malfunction.

The safest means to operate the machine where overhead obstructions, other moving
equipment, and obstacles, depressions, holes, drop offs.

Means to avoid the hazards of unprotected electrical conductors.

Specific job requirements or machine application.
Training Supervision
Training must be done under the supervision of a qualified person in an open area free of
obstructions until the trainee has developed the ability to safely control and operate the
machine.
Operator Responsibility
The operator must be instructed that he/she has the responsibility and authority to shut down
the machine in case of a malfunction or other unsafe condition of either the machine or the
job site.
3.2 Preparation, Inspection and Maintenance
3.2.1 General
This section provides the necessary information needed by those personnel that are
responsible to place the machine in operation readiness, and lists checks that are performed
prior to use of the machine. It is important that the information contained in this section be
read and understood before any attempt is made to operate the machine. Ensure that all the
Section
3