DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 60 / 97

Operation & Maintenance Manual Section5-Operation Instruction
Dingli Machinery
5-7
5.5 Steering Operation
Position thumb switch on Drive/Steer controller to RIGHT for steering right, or to LEFT for
steering left.
5.6 Platform Operation
Platform Level Adjustment
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD
CAUSE THE LOAD/OCCUPANTS TO SHIFT OR FALL. FAILURE TO
DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
This switch is used to adjust the platform level in situations such as ascending/descending a
grade.
1.
Leveling Up, Activated the FootSwitch to Raise platform, Position the Platform Toggle
Switch Level to Up and hold until platform is level.
2. Leveling Down, Activated the FootSwitch to Raise platform, Position the Platform Level
Toggle Switch Level to Down and hold until the platform is level.
Platform Rotation
1.
Activated the FootSwitch
2. To rotate the platform to the left or right, use the Platform Rotate control switch to select
the direction and hold until desired position is reached.
5.7 Turntable Swing Operation
DO NOT SWING OR RAISE BOOM ABOVE HORIZONTAL WHEN
MACHINE IS OUT OF LEVEL.
DO NOT DEPEND ON TILT ALARM AS A LEVEL INDICATOR FOR
THE CHASSIS.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY
CONTROL LEVER OR TOGGLE SWITCH CONTROLLING PLATFORM
MOVEMENT DOES NOT RETURN TO THE ‘OFF’ OR NEUTRAL
POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH
OR LEVER IS RELEASED, REMOVE FOOT FROM FOOTSWITCH OR