DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 42 / 97

Operation & Maintenance Manual Section4-Machine Controls and Indicators
Dingli Machinery
4-8
Table 4-2 The Explanations for the Platform Console
Item Name
Description
1 The Auxiliary Power
Control Switch The Auxiliary Power control switch energizes the
electrically operated hydraulic pump. (Switch must be
held ON for duration of auxiliary pump use.)
The auxiliary pump functions to provide sufficient oil
flow to operate the basic machine functions should the
main pump or engine fail. The auxiliary pump will
operate tower boom lift, tower telescope, main boom lift,
main telescope and swing.
2 The Glow Plug Control
Switch It is used for assisting method to start the engine when
the temperature is lower. Push Forward and Hold it
about 8 Second, then release the toggle lever to Push the
Start Toggle Switch to Start the engine.
3 The Engine Start Switch A Toggle Switch, Push Up Forward until the engine
starts, it would return Back to Original Position
Automatically once be released.
Note: It only be function after the Selecting Switch
turning to the Ground Console Position.
4 The Driving Enable
Override Swith Not used
5 Emergency Button A two-position red mushroom shaped switch furnishes
power to Platform Select switch when pulled out (ON).
When pushed in (OFF), power is shut off to the Platform
Select switch.
6 The Control EUM Unit and
Panel
Refer to Display Panel for detail information
7 The Horn Button If pressed, this switch supplies power to the horn.