DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 31 / 97

Operation & Maintenance Manual
Section3-User Responsibility, Machine
Preparation, and Inspection
Dingli Machinery
3-8
TO AVOID INJURY, DO NOT OPERATE A MACHINE UNTIL ALL
MALFUNCTIONS HAVE BEEN CORRECTED. USE OF A
MALFUNCTIONING MACHINE IS A SAFETY VIOLATION.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF
DURING WALKAROUND INSPECTION.
Walk-Around Inspection Checklist.
1) Platform Assembly - No loose or missing parts, no visible damage. Lock bolts in place.
Footswitch in good working order, not modified disabled or blocked.
2) Platform Control Console - Switches and levers return to neutral and are properly secured,
no loose or missing parts, no visible damage, decals/placards secure and legible, control
marking legible.
3) Jib Articulating Cylinder - No visible damage; pivot pins secure; hydraulic hoses
undamaged, not leaking.
4) Slave Cylinder - No visible damage; pivot pins secure; hydraulic hoses undamaged, not
leaking
5) Boom Sections/Uprights/Lift Cylinders and Master Cylinder - No visible damage; pivot
pins secure; hydraulic hoses undamaged, not leaking. Uprights in vertical position.
6) Wheel/Tire Assembly, Right Rear - Properly secured, no loose or missing lug nuts, no
visible damage.
7) Drive Motor, Brake, and Hub - No visible damage; no evidence of leakage.
8) Control Valve - No loose or missing parts; evidence of leakage; unsupported wires or
hoses; damaged or broken wires.
9) Hood, Right Side - Properly secured; no loose or missing parts
10) Ground Controls - Switches operable, no visible damage, decals secure and legible.
11) Fuel Supply - Filler cap secure, no visible damage to the tank or evidence of leaks.
12) Tie Rod Ends and Steering Spindles - No loose or missing parts; no visible damage.
13) Drive Motor, Brake, and Hub - No visible damage; no evidence of leakage.
14) Oscillating Axle - No loose or missing hardware; no visible damage.
15) Wheel/Tire Assembly, Right Front - Properly secured, no loose or missing lug nuts, no
visible damage.
16) Wheel/Tire Assembly, Left Front - Properly secured, no loose or missing lug nuts, no
visible damage.
17) Drive Motor, Brake, and Hub - No visible damage; no evidence of leakage.
18) Tie Rod Ends and Steering Spindles - No loose or missing parts; no visible damage. Steer
Cylinder - Properly secured; no visible damage or signs of leakage; evidence of proper
lubrication.
19) Hydraulic Oil Supply - Recommended oil level sight gauge. (Check level with cold oil,
systems shut down, machine in stowed position) Cap in place and secure. Hydraulic Filter
- Housing secure no visible damage; no evidence of leakage,
20) Horizontal Limit Switches - Switches operable; no visible damage.
21) Engine Air Filter - No loose or missing parts; no visible damage; element clean. Engine
Oil Supply - Full mark on dipstick; filler cap secure. Muffler and Exhaust System -
Properly secured no evidence of leakage. The coolant level.
22) Hood, Right Side - Properly secured; no loose or missing parts.
23) Turntable Bearing - No loose or missing hardware; no visible; evidence of proper