DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 59 / 97

Operation & Maintenance Manual Section5-Operation Instruction
Dingli Machinery
5-6
5.4 Traveling (Driving) Operation
DO NOT DRIVE WITH BOOM EXTENDED OR ABOVE HORIZONTAL
EXCEPT ON A SMOOTH, FIRM AND LEVEL SURFACE.
TO AVOID LOSS OF TRAVEL CONTROL OR “TIP OVER”, DO NOT
DRIVE MACHINE ON GRADES EXCEEDING THOSE SPECIFIED ON
THE SERIAL NUMBER TAG OR AS NOTED IN THE OPERATORS
MANUAL.
DO NOT DRIVE ON SIDESLOPES WHICH EXCEED 5 DEGREES.
USE EXTREME CAUTION WHEN DRIVING IN REVERSE AND AT
ALL TIMES WHEN THE PLATFORM IS ELEVATED.
TRAVEL GRADES WITH DRIVE SPEED/TORQUE SELECT SWITCH
IN THE FORWARD POSITION. USE CAUTION WHEN DRIVING IN
REVERSE AND WHEN DRIVING WITH PLATFORM ELEVATED,
ESPECIALLY WHEN DRIVING WITH ANY PART OF MACHINE
WITHIN 6 FEET (2 M) OF AN OBSTRUCTION.
BEFORE DRIVING, MAKE SURE BOOM IS POSITIONED OVER REAR
DRIVE AXLE. IF BOOM IS OVER FRONT WHEELS, STEER AND
DRIVE CONTROLS WILL BE REVERSED.
LEVEL
Traveling Forward and Reverse
1)
With the engine running, activate footswitch.
2) Position Drive controller to FORWARD or REVERSE as desired.
DO NOT DRIVE THE MACHINE ON GRADES AND SIDESLOPES
EXCEEDING THOSE SPEICIFIED ON THE TECHNICAL SPECIFICATION