DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 44 / 97

Operation & Maintenance Manual Section4-Machine Controls and Indicators
Dingli Machinery
4-10
12 The Main Boom Telescopic
Control Switch Three Position Toggle Switch, Provides for extension
and retraction of the Main Boom
13 The Lower and Mid Boom
Control Switch A Three Position Toggle Switch. Push the toggle lever
Up according to UP Arrow direction, the Lower and the
Mid Boom would be raised simultaneously, until the
Boom Up to the Up limited position. And Push the
toggle lever to the opposite direction, the Lower and Mid
Boom would be get Down until the Boom to the Lowest
Position. Once the toggle lever is released, it would
return to the Original position.
14 The Platform Leveling
Control Switch A three position switch allows the operator to adjust the
automatic self leveling system. This switch is used to
adjust the platform level in situations such as
ascending/descending a grade
ONLY USE THE PLATFORM LEVELING
OVERRIDE FUNCTION FOR SLIGHT LEVELING
OF THE PLATFORM. INCORRECT USE COULD
CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN
DEATH OR SERIOUS INJURY.
15 The Jib Boom Up & Down
Control Switch Three Position Toggle Switch, Provides for Raising and
Lowering of the Jib Boom
16 The Platform Rotate
Control Switch A three position Toggle Switch allows the operator to
rotate the Platform
17 The Driving Controller Drive/Steer
The DRIVE joystick provides for driving either forward
or backward. The controller is ‘ramped’ to allow variable
drive speed.
Steering is controlled by a thumb operated switch on top