DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 69 / 97

Operation & Maintenance Manual Section6-Emergency Operation
Dingli Machinery
6-2
4) Remove chocks from wheels as needed.
6.3 Emergency Controls and Their Locations
Power/Emergency Stop Switches
1)
There is one of these red mushroom shaped switches at both the Ground Controls and
Platform Controls. When it is depressed it will immediately stop the machine.
CHECK MACHINE DAILY TO MAKE SURE EMERGENCY STOP SWITCH GUARD IS
IN PLACE AND THAT GROUND CONTROL INSTRUCTIONS ARE IN PLACE AND
LEGIBLE.
2)
Installed on the Platform Console, this round red switch is pulled up for normal machine
functions. In an emergency, push the button to the down position with your palm and
machine will immediately stop.
Ground Control Station
The Ground Control Station is located on the right front side of the turntable. The controls on
this panel provide the means for overriding the platform controls, and for controlling the
boom and swing functions from the ground. Place the KEY SELECT switch to GROUND
position and operate the proper switch to lift, swing, or telescope the boom, or level the
platform.
Auxiliary Power
A toggle type auxiliary power control switch is located on the platform control station and
another is located on the ground control station. Operation of either switch turns on the
electrically driven auxiliary hydraulic pump. This should be used in case of failure of the
main power plant. The auxiliary pump will operate boom lift, telescope and swing. To
activate auxiliary power as bellow:
1)
Position PLATFORM/GROUND SELECT KEY SWITCH to PLATFORM.
2) Position POWER/EMERGENCY STOP switch to ON.
3) Depress and hold footswitch.
4) Operate appropriate control switch, lever or controller for desired function and hold.
5) Position AUXILIARY POWER switch to ON and hold.
6) Release AUXILIARY POWER switch, selected control switch, lever or controller, and
footswitch.
7) Position POWER/EMERGENCY STOP switch to OFF.
To activate auxiliary power from the ground control station:
1)
Position PLATFORM/GROUND SELECT KEY SWITCH to GROUND.
2) Position POWER/EMERGENCY STOP switch to ON.