DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 14 / 97

Operation & Maintenance Manual Section1-Safety Precaution
Dingli Machinery
1-8

Do not increase the platform size with unauthorized deck extensions or attachments.

If boom assembly or platform is in a position that one or more wheels are off the ground,
all persons must be removed before attempting to stabilize the machine. Use cranes,
forklift trucks, or other appropriate equipment to stabilize machine and remove personnel.
Crushing and Collision Hazards

Approved head gear must be worn by all operating and ground personnel.

Check work area for clearances overhead, on sides, and bottom of platform when lifting
or lowering platform, and driving.

During operation, keep all body parts inside platform railing.

Use the boom functions, not the drive function, to position the platform close to
obstacles.

Always post a lookout when driving in areas where vision is obstructed.

Keep non-operating personnel at least 6 ft. (1.8m) away from machine during all driving
and swing operations.

Limit travel speed according to conditions of ground surface, congestion, visibility, slope,
location of personnel, and other factors which may cause collision or injury to personnel.

Be aware of stopping distances in all drive speeds. When driving in high speed, switch to
low speed before stopping.

Travel grades in low speed only.

Do not use high speed drive in restricted or close quarters or when driving in reverse.