DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 29 / 97

Operation & Maintenance Manual
Section3-User Responsibility, Machine
Preparation, and Inspection
Dingli Machinery
3-6
Ensure a copy of this manual and other Safety Manual, are enclosed in the manual storage
box.
4)
Machine Log.
Ensure a machine operating record or log is kept, check to see that it is current and that no
entries have been left uncleared, leaving machine in an unsafe condition for operation.
5)
Start each day with a full fuel tank.
TO AVOID INJURY, DO NOT OPERATE A MACHINE UNTIL ALL
MALFUNCTIONS HAVE BEEN CORRECTED. USE OF A
MALFUNCTIONING MACHINE IS A SAFETY VIOLATION. TO AVOID
POSSIBLE INJURY, BE SURE MACHINE POWER IS "OFF" DURING
WALK-AROUND INSPECTION.
NOTE:
Check boom limit switches on upright for proper operation and security, both visually
and manually. The lower switch cuts out drive speed when the lower boom is above horizontal.
The upper switch cuts out drive speed when the upper boom is above horizontal. Only creep
drive speed will continue to function.
6)
Check platform footswitch for proper operation.
Switch must be released to start engine and depressed to operate machine.
7) Check that drive brakes hold when machine is driven up a grade not greater than
specified on the serial number placard and stopped.
NOTE: On new machines, those recently overhauled, or after changing hydraulic oil,
operate all systems a minimum of two complete cycles and recheck oil level in reservoir.
8) Assure that all items requiring lubrication are serviced.
Refer to Figure 3-1., Lubrication Diagram for specific requirements.