DINGLI BA14J-AWD, Operation And Maintenance Manual

Page: 37 / 97

Operation & Maintenance Manual Section4-Machine Controls and Indicators
Dingli Machinery
4-3
Figure 4-1 The Ground Console Panel
Table 4-1 the Explanation for the Ground Console Panel
Item Name
Description
1 The Multifunction Gauge The Multifunction Gauge, is used to Display the

Fuel level

Working Hours Meter

the Alarm Light for the Engine High Coolant
Temperature Arrived the 105
℃

the Alarm Light for the Engine Low Oil Pressure
2 The Engine Speed Control
Switch A Two Position Toggle Switch, which is used to set the
engine speed, there are three working model:

The engine speed is set at Low speed default after
the engine is started.

Push the Toggle Switch to Rabbit direction one
time, the engine would be turning in highest
speed, no matter a function action is chosen or not.

Push the Toggle Switch to Rabbit direction two
times, the engine would be turning in low speed;
once a function action is chosen, the engine would
be turning in Lower or High speed against the
speed set by the system.
3 The Ground and Platform
Console Selecting Switch A three position toggle switch is used to supplies
power to the platform console or platform console
when positioned to Platform.

Normally, it is in Neutral, the Power is cut off

Turn the Key Switch Counter-clockwise to the
Blue Square Position, the machine would be
controlled by the Platform Console

Turn the Key Switch Clockwise to the Red Circle
Position, the machine would be controlled by the
Ground Console.
NOTE: When machine is shut down the
Platform/Ground Select switch and Emergency Stop
must be positioned to OFF.

NOTE: With PLATFORM/GROUND SELECT
switch in the center position, power is shut off to
controls at both operating Console.
4 Engine Starting Switch A three position Toggle Switch, it is used to start the