Digital Equipment RW504-ZA, Service Manual

Page: 51 / 220

1. With
READY
displayed, press
NEXT
until
CONF *
displays.
2. Press
ENTER
. CONF 0 appears in the display window ( 0 is flashing).
3. Press
NEXT
until CONF 17 is displayed.
You are now prompted to enter the old or default security code.
4. Press
ENTER
.
CODE1
and a flashing
0
is displayed.
5. Press
NEXT
until the first number of the old or default (0) security code is
displayed.
6. Press
ENTER
.
CODE2
and a flashing
0
is displayed.
7. Press
NEXT
until the second number of the old or default (0) security code is
displayed.
8. Press
ENTER
.
CODE3
and a flashing
0
is displayed.
9. Press
NEXT
until the third number of the old or default (0) security code is
displayed.
10. Press
ENTER
. SET is displayed if you entered the old number correctly.
NO CONFIG is displayed briefly and then CONF 17 is displayed if a mistake was
made in keying in the old security code. Follow steps 4 through 9 again.
Note
It is a good idea for the customer to write down the new security code
prior to entering it into the disk library.
Follow these steps to enter the new security code:
1. Press
ENTER
.
NEW1
and a flashing
0
is displayed.
2. Press
NEXT
to choose the first number of the new security code.
3. Press
ENTER
. NEW2 and a flashing 0 is displayed.
4. Press
NEXT
to choose the second number of the new security code.
5. Press
ENTER
.
NEW3
and a flashing
0
is displayed.
6. Press
NEXT
to choose the third number of the new security code.
7. Press
ENTER
.
SET 17
is displayed.
Product Operation and Configuration 3–9