Digital Equipment RW504-ZA, Service Manual

Page: 55 / 220

Table 3–3 (Cont.) Autochanger Configuration Choices
No. Function Default Options
Clears/zeros these logs:
#4 - Drive Load Count
#5 - Poweron Hours
#9 - Move
#12 - Flip
#14 - Mailslot Rotation
Save - maintains the specified logs
until clear is configured.
19 Set Autochanger Retries
A - Max. attempts to find home
B - Max. attempts to do move
C - Max. attempts to restore
move after failure.
4
2
1
Sets the number of attempts to
retry moves before giving up.
20 Poweron Cartridge Security
(security code required) Off On - maintains the status of
configuration 15 upon power cycle
or power failure.
Off - Configuration 15 is not
maintained through a power cycle
or power failure.
21 Enable Autochanger Retries On On - Autochanger attempts to
correct itself when it encounters
difficulty.
Off - Autochanger does not attempt
to correct itself when it encounters
difficulty.
22 Clear Drive 1 Load Count Log
(Information Log 4) Save Clear - clears the Drive 1 Load
Count Log immediately.
Save - saves the Drive 1 Load
Count Log until clear is configured.
27 Report Recovered Error Off On - reports the SCSI-level error to
the host.
Off - no reports of SCSI-level errors
to the host.
(continued on next page)
Product Operation and Configuration 3–13