Title:
DICTUM HEALTH IDM100 MEDICAL TABLET INSTRUCTIONS FOR USE
DCO#:
00271
Document#:
870-00001-01
Originating Author:
E Keate
Modifying Author:
R. Massie
Date Created:
9/04/2018
Date Modified:
05/28/2020
Revision:
AR
Page
14 of 175
3
IDM100 Medical Tablet Setup
This section describes how to set up and register a new IDM100 Medical Tablet. For additional information,
refer to the Quick Start Guide.
3.1
Charge the Battery
Do not power on the IDM100 Medical Tablet until after it is charged fully.
1. To charge the battery, plug the tip of the power cord into the power supply port on the left side of the
device.
2. Plug the power cord into an electrical outlet. The status light (next to the power button) turns orange.
3. Allow the battery to charge continuously for about 3 hours or until it is charged fully.
When charging is complete, the status light turns off.
3.2
Connect Accessories
Labeled ports on either side of the IDM100 Medical Tablet are provided for connecting the accessories to the
device. The ports are described below.
