4. BASIC USER INTERFACE
Page 73
© 2009 DH Instruments, a Fluke Company
to accept IP address and display the PPC4 MAC (Media Access Control)
address. This value is unique to each PPC4 and is contained in the Ethernet
module of the PPC4 if the Ethernet option is selected.
4.5.3
<Spec>, <Head>
PURPOSE
To view or change the properties of the fluid Head function (see Section 3.2.16) including the
unit of measure of length for head height entry and the test gas species for density
calculations.
OPERATION
From the Main Menu screen, press
<Spec>
,
<Head>
.
Select the desired height unit of measure and
.
Select the type of gas that is being supplied to PPC4 and
. The characteristics of the gas
selected will be used by PPC4 in calculating head pressures.
4.5.4
<Spec>, <Reset>
PURPOSE
To reset various PPC4 settings to default or factory values (see Section 3.2.25).
Caution
PPC4 reset functions will change current settings to factory defaults.
These may include settings vital to PPC4 operation and affecting the
calibration of the quartz reference pressure transducers (Q-RPTs). Reset
functions should only be used by qualified personnel with knowledge of
reset consequences. Reset functions should not be used experimentally.
OPERATION
To access the RESET menu, press
<Spec>
,
<Reset>
.
The display is:
♦Sets ♦Units ♦Cal
♦All
RESET menu choices include:
<Sets>
to reset general system operating parameters (see Section 4.5.4.1).
<Units>
to reset unit of measure functions (see Section 4.5.4.2).
<Cal>
to reset internal calibration coefficients and modes (see Section 4.5.4.3).
<All>
to reset all settings except ID and security password to factory default values (see
Section 4.5.4.4).
4.5.4.1 <Set>
PURPOSE
The Reset – Sets resets are itemized in Table 8, Section 3.2.25.1.
Summary of Contents for PPC4
Page 70: ...PPC4 OPERATION AND MAINTENANCE MANUAL 2009 DH Instruments a Fluke Company Page 58 Notes...
Page 194: ...PPC4 OPERATION AND MAINTENANCE MANUAL 2009 DH Instruments a Fluke Company Page 182 Notes...
Page 226: ...PPC4 OPERATION AND MAINTENANCE MANUAL 2009 DH Instruments a Fluke Company Page 214 Notes...
