DH Instruments PPC4, Operation And Maintenance Manual

Page: 2 / 228

© 2009 DH Instruments, a Fluke Company

Warning
•
High pressure liquids and gases are potentially hazardous. Energy stored
in these liquids and gases can be released unexpectedly and with extreme
force. High pressure systems should be assembled and operated only by
personnel who have been instructed in proper safety practices.
•
The PPC4 must be properly earthed. Only use a supply outlet that has a
protective earth contact. If there is any doubt as to the effectiveness of the
supply outlet earth, do not connect the PPC4.
•
This instrument is not to be operated in any other manner than that
specified by the manufacturer.
© 2009 DH Instruments, a Fluke Company All rights reserved.
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the express written permission of
DH Instruments, a
Fluke Company 4765 East Beautiful Lane, Phoenix AZ 85044-5318, USA.
DH Instruments makes sincere efforts to ensure accuracy and quality of its’ published materials; however, no warranty, expressed
or implied, is provided. DH Instruments disclaims any responsibility or liability for any direct or indirect damages resulting from the
use of the information in this manual or products described in it. Mention of any product or brand does not constitute an
endorsement by
DH Instruments of that product or brand. This manual was originally composed in English and was subsequently
translated into other languages. The fidelity of the translation cannot be guaranteed. In case of conflict between the English
version and other language versions, the English version predominates.
Products described in this manual are manufactured under international patents and one or more of the following U.S. patents:
5,142,483; 5,257,640; 5,331,838; 5,445,035. Other U.S. and international patents pending.
AutoRange, AutoZ, DH Instruments , DH , DHI , COMPASS, PPC, PPC4, Q-RPT, RPM, RPM4, SDS and SPLT are trademarks,
registered and otherwise, of DH Instruments, a Fluke Company.
Document No. 3306047 Rev 003
091211
Printed in the USA.