Chapter 14 Fault Codes | IED-S
14-13
Code#
KPC-CC01 Display
Fault Name
Description
F160
STO relay sticking
Fault occurs when both STO1 and STO2, drive’s safety
control circuit terminals, remain activated with E24 after
SW operation contactor deactivates (OFF)
Action and Reset
Action Stops
urgently
Related Parameters
Set Pr.06-49 (STO Latch Selection)=1, 2 or 3 in the VFD-ED user manual
Reset Method
Press the RESET key on the digital keypad, press the external reset device, or
power-on again (choose either)
Code#
KPC-CC01 Display
Fault Name
Description
F161
STO OFF error
Fault occurs when both STO1 and STO2, drive’s safety
control circuit terminals, are not activated with E24 after
SW operation contactor activates (ON)
Action and Reset
Action Stops
urgently
Related Parameters
Set Pr.06-49 (STO Latch Selection)=1, 2 or 3 in the VFD-ED user manual
Reset Method
Resets automatically after ten seconds
Code#
KPC-CC01 Display
Fault Name
Description
F162
BK1 is not reset
Fault occurs when BK1 (Brake-1 travel switch) signal is
not reset after brake contactor deactivates (OFF)
Action and Reset
Action Stops
urgently
Related Parameters
MI=30 BK1 (Brake-1 travel switch)
Reset Method
Resets automatically once brake-1 travel switch signal is reset
Code#
KPC-CC01 Display
Fault Name
Description
F163
BK2 is not reset
Fault occurs when BK2 (Brake-2 travel switch) signal is
not reset after brake contactor deactivates (OFF)
Action and Reset
Action Stops
urgently
Related Parameters
MI=31 BK2 (Brake-2 travel switch)
Reset Method
Resets automatically once brake-2 travel switch signal is reset
Code#
KPC-CC01 Display
Fault Name
Description
F164
BK3 is not reset
Fault occurs when BK3 (Brake-3 travel switch) signal is
not reset after brake contactor deactivates (OFF)
Action and Reset
Action Stops
urgently
Related Parameters
MI=32 BK3 (Brake-3 travel switch)
Reset Method
Resets automatically once brake-3 travel switch signal is reset
Summary of Contents for IED-S Series
