Delta IED-S Series, User Manual

Page: 300 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-04-1
Chapter 12 Descriptions of Parameter Settings
04 Speed Curve

: You can set this parameter during operation.
Speed at Emergency
Default: 0.15
Settings 0.00–0.30 m/s
 Sets the speed when the elevator runs with emergency power.
Inspection Speed
Default: 0.25
Settings 0.00–0.63 m/s
 Sets the inspection speed when the elevator executes the inspection.
Speed at Returning to Two Ends of the Hoistway
Default: 0.50
Settings 0.00–1.50 m/s

Sets the speed during the elevator’s position adjustment when returning to two ends of the
hoistway.
Hoistway Auto-tuning Speed
Default: 0.20
Settings 0.00–0.50 m/s

Sets the speed during the elevator’s hoistway auto-tuning.
Non-leveling Speed
Default: 0.12
Settings 0.01–0.30 m/s
 Sets the speed when the elevator stops at the non-leveling area to safely land at the nearest
floor.
Leveling Speed
Default: 0.04
Settings 0.01–0.15 m/s
 Sets the speed for elevator re-leveling.
Constant Speed Duration
Default: 500
Settings 0–3000
Acceleration
Default: 0.40
Settings 0.10–1.50 m/s 2
 Sets the acceleration for direct docking.
Deceleration
Default: 1.50
Settings 0.10–1.50 m/s 2
 Sets the deceleration for direct docking.