Delta IED-S Series, User Manual

Page: 317 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-06-10
Setting
Value
MO Function Description
use
127 SCON (Voice control) Voice shutdown and is in control operation
128 SFIR (Voice fire alarm) Voice is in fire alarm
129 SER (Voice earthquake) Voice is under earthquake
130 SFLOOD (Voice flood) Voice is at flood
131 SUPS (Voice power loss) Voice is lack of power
132 SERR (Voice elevator failure) Voice elevator is in failure
133 SPACE (Voice blank) Voice blank
150
DCBL1 (Front door close button
lamp)
Outputs the signal of front door close button lamp
151
DOBL1 (Front door open button
lamp)
Outputs the signal of front door open button lamp
152
DOBHL1 (Front door open
extended button lamp) Outputs the signal of front door open extended button
lamp
153 FULL (Full-load) Outputs full-load signal
154 OLD (Overload) Outputs overload signal
155
CLBZ (Door closing pre-warning
buzzer)
Door closing pre-warning buzzer
167
DCBL2 (Rear door close button
lamp)
Outputs the signal of rear door close button lamp
168
DOBL2 (Rear door open button
lamp)
Outputs the signal of rear door open button lamp
169
DOBHL2 (Rear door open
extended button lamp) Outputs the signal of rear door open extended button
lamp
170
DCBL1B (Front door close
auxiliary button lamp) Outputs the signal of front door close auxiliary button
lamp
171
DOBL1B (Front door open
auxiliary button lamp) Outputs the signal of front door open auxiliary button
lamp
172
DOBHL1B (Front door open
auxiliary extended button lamp) Outputs the signal of front door open auxiliary extended
button lamp
173
DCBL2B (Rear door close
auxiliary button lamp) Outputs the signal of rear door close auxiliary button
lamp
174
DOBL2B (Rear door open
auxiliary button lamp) Outputs the signal of rear door open auxiliary button
lamp
175
DOBHL2B (Rear door open
auxiliary extended button lamp) Outputs the signal of rear door open auxiliary extended
button lamp
X_INV1
Default: 0000h
X_INV2
Default: 0000h
X_INV3
Default: 0000h
Y_INV
Default: 0000h
HVX_INV
Default: 0000h
Settings 0000h–FFFFh
 This function sets the contact from N.O. to N.C. or vice versa (reverse contact). Use this function
for test only. Do NOT use it under normal mode for elevator.
 If you have set Pr.06-01 to thousands digit, namely reverse contact, setting it at Pr.06-39 makes
the reverse function invalid.
 Pr.06-39 reverse contact setting: 1–16 = Pr.06-01–Pr.06-16