Delta IED-S Series, User Manual

Page: 309 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-06-2
Default: 0
X20
Default: 0
X21
Default: 0
X22
Default: 1033
X23
Default: 1035
X24
Default: 1038
X25
Default: 1034
HVX1
Default: 15
HVX2
Default: 18
HVX3
Default: 21
HVX4
Default: 9
HVX5
Default: 8
Settings See the setting value in the Description of Function Settings for details
 You must set X1=1 (DZU; Upper Leveling Sensor) and X3=2 (DZD; Lower Leveling Sensor). For
other MIs, you can set them to different functions according to your needs.
 Setting the setting value to thousands digit changes the contact from N.O. to N.C. or vice versa.
For example, if you set DZU (Upper Leveling Sensor) to 1, the contact is N.O. (Normally Open); if
you set DZU (Upper Leveling Sensor) to 1001, the contact becomes N.C. (Normally Closed).
 The function of MI contacts is unique, that is, you cannot enter the same value into different
parameters simultaneously (even across Parameter Group 06 and 07).
Description of Function Settings
Normally open (N.O.) (contact A). ON: The contact is closed; OFF: The contact is open.
Normally closed (N.C.) (contact B). OFF: The contact is closed; ON: The contact is open.
Setting
Value
MI Function Description
1 DZU (Upper leveling sensor)
1. IED-S uses the leveling sensor signals to ensure
the elevator leveling position. The elevator drive
system enables three configurations: single-door
sensor, upper/lower leveling sensor and
upper/lower door zone sensor.
2. When running upward, the elevator receives
upper leveling signal, door zone signal, and lower
leveling signal in sequence. When running
downward, the elevator receives lower leveling
signal, door zone signal, and upper leveling signal
in sequence.
3. LED indicator is ON when the sensor is covered.
2 DZD (Lower leveling sensor)
3 FL1 (Upper door zone sensor)
1. Determines whether the elevator door opens or
not.
2. LED indicator is ON when the sensor is covered.
4 FL2 (Lower door zone sensor)
5 FL1NC (Contact B of the relay for Contact B (N.C.) of FL1 contactor (Relay). Used to