Delta IED-S Series, User Manual

Page: 147 / 417

Chapter 8 Specifications | IED-S
8-4
8-4 Operation, Storage and Transportation Environments
DO NOT expose the drive to a poor environment, such as one with dust, direct sunlight, corrosive or inflammable
gases, oil, humidity, liquids or excessive vibration. The salt in the air must be less than 0.01 mg/cm 2 every year.
Environment
Installation
Location
IEC60364-1/IEC60664-1 pollution degree 2. Indoor use only.
Surrounding
Temperature
Operation
-10–40°C, up to 50°C with derating for the operating temperature
40–50°C
with
Derating
5.5–30 kW: for every 1°C increase in temperature,
decrease the drive’s rated current by 2.5%
37–75 kW: for every 1°C increase in temperature,
decrease the drive’s rated current by 2.0%
Storage /
Transportation
-20–60°C
Non-condensing, non-freezing
Rated
Humidity
Operation
Max. 90%
Storage /
Transportation
Max. 90%
Non-condensing, non-freezing
Altitude Operation
If the drive is installed at an altitude of 0–1000 m, follow normal
operation restrictions. For altitudes of 1000–3000 m, decrease the
drive’s rated current by 1% or lower the temperature by 0.5°C for every
100 m increase in altitude. The maximum altitude for corner grounding
is 3000 m. If installing at an altitude higher than 3000 m is required,
contact Delta for more information.
Power
System
TN system *1*2
Package
Drop
Storage
ISTA procedure 1A (according to weight) IEC60068-2-31
Transportation
Vibration
 1.0 mm, peak-to-peak value range from 2–13.2 Hz
 0.7–1.0 G, range from 13.2–55 Hz
Compliance with IEC 60068-2-6
Impact Compliance with IEC/EN 60068-2-27
Protection
Level
IP00
EMC Level IEC 61800-3 and IEC 61000-4
*1: TN system: The neutral point of the power system connects directly to the ground. The exposed metal components connect to
the ground through the protective grounding conductor.
*2: Single-phase models use a single-phase three-wire power system.