Delta IED-S Series, User Manual

Page: 170 / 417

Chapter 10 Auto-tuning Process | IED-S
10-3
10-2 Motor Parameter
If you do not do the wiring or do not wire according to the manual instructions, some fault codes
may occur, but it does not affect the tuning process.
10-2-1 Pr.13-01 Control Mode
Press
Press
 3: FOC vector c Encoder (FOCPG) (IM; Induction Motor)
 8: FOC Permanent Motor control (FOCPM) (PM; Permanent Motor)
10-2-2 Pr.13-03 Elevator Rated Frequency
Press
Press
 Sets this value according to the motor nameplate. In general, set this value equal to motor's
rated frequency.
10-2-3 Pr.13-04 Motor Rated Frequency
Press
Press
 Sets this value according to the motor nameplate. If the motor is 60 Hz, set this parameter to
60. If the motor is 50 Hz, set it to 50.