Delta IED-S Series, User Manual

Page: 365 / 417

Chapter 12 Descriptions of Parameter Settings | IED-S
12-13-6
5: Single-phase input

When you set Pr.13-22 to 3, 4, 5 or 6, you can set Pr.13-24 only to 0, 1 or 2, and you cannot use
3, 4 and 5.

You must enter the correct pulse type for stable control.
PG Card C+/C-
Default: 0000h
Settings 0000h–0001h
 When using a Heidenhain ERN1387 encoder, use Pr.13-25 to adjust the definition of the Delta
PG card EMED-PGHSD-x’s terminal 10 and terminal 11 (see the table below). Refer to p.7-8 for
detailed terminal descriptions.
 Delta PG card: EMED-PGHSD-1 (D-sub Terminal #)
5
4
3 2 1
10 9 8 7 6
15 14 13 12 11
Heidenhain ERN1387
Terminal # Pr.13-25 = 0000h Pr.13-25 = 0001h
10 C- C+
11 C+ C-
Suspension Ratio
Default: 1
Settings 0–3
0 = 1: 1
1 = 2: 1
2 = 4: 1
3 = 8: 1
Gear Ratio
Default: 1.00
Settings 1.00–100.00