Delta IED-S Series, User Manual

Page: 380 / 417

Chapter 13 Warning Codes | IED-S
13-5
Code# KPC-CC01 Display Warning Name Description
1134
Motor temperature at
rear door overheats
Warning occurs when motor temperature at the rear
door (MI=118) overheats.
Action and Reset
Action
All call signals are cancelled, and the rear door open/close signal does not
output.
Related Parameters N/A
Reset Method The warning is automatically cleared after the input signal is reset.
Code# KPC-CC01 Display Warning Name Description
1135 CAR+/CAR- time-out
Warning occurs when CAR+/CAR- communication
portal is not successfully connected within default
setting time.
Action and Reset
Action Immediately acts
Related Parameters N/A
Reset Method
The warning is automatically cleared once the communication is correctly
connected.
Code# KPC-CC01 Display Warning Name Description
1136
Running time-out
during auto-tuning
Warning occurs when Pr.13-21 (Motor Auto-tuning) is
not set to 0, and the RUN command does not execute
within 10 seconds, and then Pr.13-21 is automatically
set to 0.
Action and Reset
Action Pr.13-21 (Motor Auto-tuning) is set to 0
Related Parameters Pr.13-21 (Motor Auto-tuning)
Reset Method Resets automatically
Code# KPC-CC01 Display Warning Name Description
1137 Auto-tuning time-out
Warning occurs when motor auto-tuning is not finished
within 120 seconds during motor auto-tuning, and
auto-tuning automatically stops, and then Pr.13-21
(Motor Auto-tuning) is set to 0.
Action and Reset
Action Pr.13-21 (Motor Auto-tuning) is set to 0 and motor auto-tuning stops.
Related Parameters Pr.13-21 (Motor Auto-tuning)
Reset Method Resets automatically
Code# KPC-CC01 Display Warning Name Description
1138
Coin cell battery is at
low voltage
Warning occurs when coin cell battery is at low voltage.
The warning is automatically cleared after 10 seconds.
Note that a low-voltage battery causes incorrect clock.
Action and Reset
Action This warning will be recorded in fault records
Related Parameters N/A
Reset Method Resets automatically