Delta ASDA-A3 Series, User Manual

Page: 528 / 845

ASDA-A3 Parameters
8-155
8
P6.xxx PR parameters
P6.000 Homing definition
Address: 0600H
0601H
Default: 0x00000000 Control mode: PR
Unit:
-
Setting range: 0x00000000 - 0xFFFFFF6F
Format: HEX Data size: 32-bit
Settings:
Homing definition:
B C D
A
YX Z U
A
DEC2: deceleration time selection for
second homing
YX PATH: path type
B DLY: select 0 - F for delay time Z ACC: select 0 - F for acceleration time
C N/A U
DEC1: deceleration time selection for first
homing
D BOOT: execute homing automatically
- -
 YX: PATH: path type
0x0: Stop: homing complete and stop
0x1 - 0x63: Auto: homing complete and execute the specified path (Path#1 - Path#99)
 Z: ACC: select 0 - F for acceleration time
0 - F: correspond to P5.020 - P5.035
 U: DEC1: deceleration time selection for first homing
0 - F: correspond to P5.020 - P5.035
 A: DEC2: deceleration time selection for second homing
0 - F: correspond to P5.020 - P5.035
 B: DLY: select 0 - F for delay time
0 - F: correspond to P5.040 - P5.055
 D: BOOT: when the drive is powered on, whether to search for the origin
0: do not execute homing
1: execute homing automatically (servo switches to on for the first time after applying power)
Apart from the above definitions, the related settings for homing also include:
1.
P5.004 homing methods.
2.
P5.005 - P5.006 speed setting of searching for the origin.
3.
P6.001: ORG_DEF is the coordinate of the origin and may not be 0. This function is used as a
traversal of the coordinate.