Delta ASDA-A3 Series, User Manual, Page: 415 / 845

Parameters ASDA-A3
8-42
8
P1.023 Compare - data translation (non-volatile)
Address: 012EH
012FH
Default: 0 Control mode: All
Unit: Pulse unit of compare source Setting range: -10000000 to +100000000
Format: DEC Data size: 32-bit
Settings:
When using the Compare function, add the translation value to the data array to be used as the actual
comparison data:
CMP_DATA = DATA_ARRAY[*] + P1.023 + P1.024
Example:
If the data array for comparison is DATA_ARRAY[100] = 2000; P1.023 = 40; P1.024 = 0;
then the actual comparison value = 2000 + 40 = 2040.
Note: monitor CMP_DATA with the monitoring variable 037(25h).
P1.024 ■ Compare - data translation (reset automatically)
Address: 0130H
0131H
Default: 0 Control mode: All
Unit: Pulse unit of compare source Setting range: -32768 to +32767
Format: DEC Data size: 16-bit
Settings:
When using the Compare function, add the translation value to the data array to be used as the actual
comparison data:
CMP_DATA = DATA_ARRAY[*] + P1.023 + P1.024
Note:
1.
If P1.019.Z [Bit 0] = 1, this parameter automatically resets after taking effect.
2.
Monitor CMP_DATA with the monitoring variable 037(25h).
P1.025 Low-frequency vibration suppression frequency (1)
Address: 0132H
0133H
Default: 1000 Control mode: PT / PR
Unit: 0.1 Hz Setting range: 10 - 1000
Format: DEC Data size: 16-bit
Example: 150 = 15 Hz
Settings:
Sets the first low-frequency vibration suppression frequency. When you set P1.026 to 0, the first
low-frequency vibration suppression filter is disabled.