Dell Vostro 1500 Owner'S Manual Download Page 96

Page: 96 / 250

Using the Memory Card Reader

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

To install a memory card:

Hold the card with the top side of the card facing up.

Slide the card into the slot until the card is completely seated in its

connector.
If you encounter too much resistance, do not force the card. Check the

card orientation and try again.

The computer recognizes the memory card and automatically loads the

appropriate device driver. If the configuration program tells you to load the

manufacturer's drivers, use the media that came with the memory card, if

applicable.

Removing a Memory Card or Blank

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

NOTICE:

Use the memory card configuration utility (click the

icon in the

notification area) to select a card and stop it from functioning before you remove it

from the computer. If you do not stop the card in the configuration utility, you could

lose data.

Press the card into the slot to release it from the card reader. When it is

partially ejected, remove the card.

Summary of Contents for Vostro 1500



























































































































































































































































Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands

Dell Vostro 1500, Owner'S Manual

Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands