manualshive.com logo in svg

Dell Vostro 1500, Owner'S Manual, Page: 46 / 250

Share
Download
Dell Vostro 1500 Owner'S Manual Download Page 46

46

Setting Up Your Computer

Line Conditioners

 

NOTICE: 

Line conditioners do not protect against power interruptions.

Line conditioners are designed to maintain AC voltage at a fairly constant 

level.

Uninterruptible Power Supplies

 

NOTICE: 

Loss of power while data is being saved to the hard drive may result in 

data loss or file damage.

 

NOTE: 

To ensure maximum battery operating time, connect only your computer to 

a UPS. Connect other devices, such as a printer, to a separate power strip that 

provides surge protection.

A UPS protects against power fluctuations and interruptions. UPS devices 

contain a battery that provides temporary power to connected devices when 

AC power is interrupted. The battery charges while AC power is available. See 

the UPS manufacturer documentation for information on battery operating 

time and to ensure that the device is approved by Underwriters Laboratories 

(UL).

Summary of Contents for Vostro 1500



























































































































































































































































Reviews:

No comments