manualshive.com logo in svg

Dell Vostro 1500, Owner'S Manual, Page: 137 / 250

Share
Download
Dell Vostro 1500 Owner'S Manual Download Page 137

Troubleshooting

137

C

H E C K

 

T H E

 

N E T WO R K

 

L I G H T S

 

O N

 

T H E

 

N E T W O R K

 

C O N N E C T O R

—

No light 

indicates that no network communication exists. Replace the network cable.

R

E S TA RT

 

T H E

 

CO MP U T E R

 

A N D

 

L O G

 

O N

 

T O

 

T H E

 

N ET W O R K

 

A G A I N

C

H E C K

 

YOU R

 

N ET W O R K

 

SE T T I N G S

—

Contact your network administrator or 

the person who set up your network to verify that your network settings are 

correct and that the network is functioning.

Mobile Broadband (Wireless Wide Area Network [WWAN])

 

NOTE: 

The Dell Mobile Broadband Card Utility user’s guide and the Mobile 

Broadband ExpressCard user’s guide are available through Windows Help and 

Support (click Start

→

 Help and Support). You can also download the Dell Mobile 

Broadband Card Utility user’s guide from support.dell.com.

 

NOTE: 

The   icon appears in the notification area if the computer has a Dell 

WWAN device installed. Double-click the icon to launch the utility.

A

C T I V A T E

 

T H E

 M

O B I L E

 B

RO ADBAND

 E

XP R E SS

C

A R D

—

You must activate the 

Mobile Broadband ExpressCard before you can connect to the network. 

Position the mouse over the   icon in the notification area to verify the 

status of the connection. If the card is not activated, follow the card 

activation instructions located within the Dell Mobile Broadband Card 

Utility. To access the utility, double-click the 

icon located in the taskbar, at 

the lower-right corner of your screen. If your ExpressCard is not a Dell-

branded card, see the manufacturer’s instructions for your card.

C

H E C K

 

N ET W O R K

 

CO NN E C T I O N

 

S T A T U S

 

I N

 

T H E

 D

E L L

 M

O B I L E

 B

RO ADBAND

 C

A R D

 

U

T I L I T Y

—

Double-click the   icon to launch the Dell Mobile Broadband 

Card Utility. Check the status in the main window:

•

No card detected

 — Restart the computer, and launch the Dell Mobile 

Broadband Card Utility again. 

•

Check your WWAN service

 — Contact your cellular service provider to 

verify your plan coverage and supported services.

Power Problems

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

Summary of Contents for Vostro 1500



























































































































































































































































Reviews:

No comments