manualshive.com logo in svg

Dell Vostro 1500, Owner'S Manual, Page: 189 / 250

Share
Download
Dell Vostro 1500 Owner'S Manual Download Page 189

Adding and Replacing Parts

189

Internal Card With Bluetooth

®

 Wireless 

Technology

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist 

grounding strap or by periodically touching an unpainted metal surface (such as a 

connector on the back of the computer).

 

NOTICE: 

To help prevent damage to the system board, remove the battery from the 

battery bay before you begin working inside the computer. 

If you ordered an internal card with Bluetooth wireless technology with your 

computer, it is already installed.

Removing the Card

1

Follow the procedures in "Before You Begin" on page 161.

2

Remove the hinge cover (see "Hinge Cover" on page 168).

3

Disconnect the cable on the card. 

4

Grasp the connector end of the card and slide it out from under the 

securing tabs.

Summary of Contents for Vostro 1500



























































































































































































































































Reviews:

No comments