Dell Vostro 1500 Owner'S Manual Download Page 43

Page: 43 / 250

Setting Up Your Computer

NOTE:

Access to the Dell™ Knowledge Base document may not be available in

certain countries.

Microsoft Windows Vista™

Click the Windows Vista Start button

, and then click

Transfer files

and settings

→

Start Windows Easy Transfer.

In the

User Account Control

dialog box, click

Continue

Click

Start a new transfer

Continue a transfer in progress

Follow the instructions provided on the screen by the Windows Easy Transfer

wizard.

Setting Up a Printer

NOTICE:

Complete the operating system setup before you connect a printer to the

computer.

See the documentation that came with the printer for setup information,

including how to:

• Obtain and install updated drivers.
• Connect the printer to the computer.
• Load paper and install the toner or ink cartridge.

For technical assistance, refer to the printer owner's manual or contact the

printer manufacturer.

Printer Cable

Your printer connects to your computer with a USB cable. Your printer may

not come with a printer cable, so if you purchase a cable separately, ensure

that it is compatible with your printer and computer. If you purchased a

printer cable at the same time you purchased your computer, the cable may

arrive in the computer’s shipping box.

Summary of Contents for Vostro 1500



























































































































































































































































Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands

Dell Vostro 1500, Owner'S Manual

Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands