Dell Vostro 1500 Owner'S Manual Download Page 176

Page: 176 / 250

176

Adding and Replacing Parts

Replacing the DIMM B Memory Module

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a

connector on the back of the computer).

Align the notch in the module edge connector with the tab in the

connector slot.

Slide the module firmly into the slot at a 45-degree angle, and rotate the

module down until it clicks into place. If you do not feel the click, remove

the module and reinstall it.

NOTE:

If the memory module is not installed properly, the computer may not boot.

No error message indicates this failure.

securing clips (2)

memory module

Summary of Contents for Vostro 1500



























































































































































































































































Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands

Dell Vostro 1500, Owner'S Manual

Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands