Dell Vostro 1500 Owner'S Manual Download Page 92

Page: 92 / 250

Using ExpressCards

Remove the blank before installing an ExpressCard. To remove the blank, see

"Removing an ExpressCard or Blank" on page 93.

Installing an ExpressCard

You can install an ExpressCard while the computer is running. The computer

automatically detects the card.
ExpressCards are generally marked with a symbol (such as a triangle or an

arrow) or a label to indicate which end to insert into the slot. The cards are

keyed to prevent incorrect insertion. If card orientation is not clear, see the

documentation that came with the card.

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

To install an ExpressCard:

Hold the card with the top side of the card facing up.

Slide the card into the slot until the card is completely seated in its

connector.
If you encounter too much resistance, do not force the card. Check the

card orientation and try again.

slot

ExpressCard

Summary of Contents for Vostro 1500



























































































































































































































































Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands

Dell Vostro 1500, Owner'S Manual

Search results

Summary of Contents for Vostro 1500

Reviews:

Related manuals for Vostro 1500

Brands by name

Popular brands