LED and CCFL Displays: Dell Precision M6400 Service Manual
file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]
two in the bracket along the top of the display panel.
5. Replace the display bezel (see
Replacing the Display Bezel
).
6. Follow the procedures in
After Working on Your Computer
.
Removing the Inverter Board (CCFL Display Only)
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in
Before Working on Your Computer
.
2. Remove the display bezel (see
Removing the Display Bezel
).
3. Disconnect the inverter cables from the inverter board.
4. Remove the M2 x 3-mm screws from the inverter board, and lift the inverter board out of the display cover.
1 display cover
2 inverter board
3 M2 x 3-mm screw 4 inverter cables (2)
Replacing the Inverter Board (CCFL Display Only)
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Place the inverter board in the display cover.
2. Connect the inverter cables to the inverter board.
3. Replace the M2 x 3-mm screw.
4. Replace the display bezel (see
Replacing the Display Bezel
).
