Dell Precision M6300 User Manual Download Page 259

Page: 259 / 292

Getting Help

259

[email protected]
[email protected]
[email protected] (Latin America and Caribbean countries only)
[email protected]

(Asian/Pacific countries only)

• Dell Marketing and Sales e-mail addresses

[email protected]

(Asian/Pacific countries only)

[email protected] (Canada only)

• Anonymous file transfer protocol (FTP)

ftp.dell.com

anonymous

, and use your e-mail address as your password.

AutoTech Service

Dell's automated support service—AutoTech—provides recorded answers to the

questions most frequently asked by Dell customers about their portable and

desktop computers.
When you call AutoTech, use your touch-tone telephone to select the subjects

that correspond to your questions. For the telephone number to call for your

region, see "Contacting Dell" on page 263.

Automated Order-Status Service

To check on the status of any Dell products that you have ordered, you can go to

support.dell.com

or you can call the automated order-status service. A

recording prompts you for the information needed to locate and report on your

order. For the telephone number to call for your region, see "Contacting Dell" on

page 263 Dell.

Problems With Your Order

If you have a problem with your order, such as missing parts, wrong parts, or

incorrect billing, contact Dell for customer assistance. Have your invoice or

packing slip handy when you call. For the telephone number to call for your

region, see "Contacting Dell" on page 263.

book.book Page 259 Tuesday, August 28, 2007 10:20 AM

Summary of Contents for Precision M6300





































































































































































































































































































Search results

Summary of Contents for Precision M6300

Reviews:

Related manuals for Precision M6300

Brands by name

Popular brands

Dell Precision M6300, User Manual

Search results

Summary of Contents for Precision M6300

Reviews:

Related manuals for Precision M6300

Brands by name

Popular brands