Dell Precision M6300 User Manual Download Page 170

Page: 170 / 292

170

Reinstalling Software

Restoring Your Operating System

You can restore your operating system in the following ways:

• System Restore returns your computer to an earlier operating state without

affecting data files. Use System Restore as the first solution for restoring

your operating system and preserving data files.

• Dell PC Restore by Symantec (available in Windows XP) and Dell Factory

Image Restore (available in Windows Vista) returns your hard drive to the

operating state it was in when you purchased the computer. Both

permanently delete all data on the hard drive and remove any programs

installed after you received the computer. Use Dell PC Restore or Dell

Factory Image Restore only if System Restore did not resolve your

operating system problem.

• If you received an

Operating System

disc with your computer, you can use

it to restore your operating system. However, using the

Operating System

disc also deletes all data on the hard drive. Use the disc

only

if System

Restore did not resolve your operating system problem.

Using Microsoft

Windows

System Restore

The Windows operating systems provide a System Restore option which

allows you to return your computer to an earlier operating state (without

affecting data files) if changes to the hardware, software, or other system

settings have left the computer in an undesirable operating state. Any

changes that System Restore makes to your computer are completely

reversible.

NOTICE:

Make regular backups of your data files. System Restore does not

monitor your data files or recover them.

NOTE:

The procedures in this document were written for the Windows default

view, so they may not apply if you set your Dell™ computer to the Windows Classic

view.

Starting System Restore

Windows XP

NOTICE:

Before you restore the computer to an earlier operating state, save and

close any open files and exit any open programs. Do not alter, open, or delete any

files or programs until the system restoration is complete.

book.book Page 170 Tuesday, August 28, 2007 10:20 AM

Summary of Contents for Precision M6300





































































































































































































































































































Search results

Summary of Contents for Precision M6300

Reviews:

Related manuals for Precision M6300

Brands by name

Popular brands

Dell Precision M6300, User Manual

Search results

Summary of Contents for Precision M6300

Reviews:

Related manuals for Precision M6300

Brands by name

Popular brands