Dell PowerEdge R310, Owner'S Manual

Page: 58 / 176

58
Using the System Setup Program and UEFI Boot Manager
SATA Settings Screen
Logical Processor
(
Enabled default)
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled , the BIOS reports both logical processors. If set
to Disabled , only one logical processor is monitored by
the BIOS.
Virtualization Technology
(
Disabled default)
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Execute Disable
(
Enabled default)
Enables or disables Execute Disable Memory Protection
Technology.
Number of Cores per
Processor
(
All default)
If set to All , the maximum number of cores in each
processor is enabled.
Turbo Mode
(
Enabled default)
If Turbo Boost technology is supported by the processor,
enables or disables
Turbo Mode .
C States
(
Enabled default)
When set to Enabled , the processor can operate in all
available power states.
Processor X ID Displays the family, model, level 2 cache size, level 3
cache size, and number of cores of the processor.
Option Description
SATA Controller
(
ATA default)
Allows the embedded SATA to be set to Off , ATA , or
RAID modes.
NOTE:
The UEFI support is disabled if SATA is set to the
RAID
mode.
Port A
(
Auto default)
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Port B
(
Off default)
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Option Description
R310HOM.book Page 58 Thursday, March 4, 2010 1:03 AM