Dell PowerEdge R310 Owner'S Manual Download Page 29

Page: 29 / 176

About Your System

E1420

CPU Bus parity

error. Power

cycle AC.

The system BIOS has
reported a processor bus
parity error.

Remove AC power to the
system for 10 seconds and
restart the system.

If the problem persists,
see "Getting Help" on
page 169.

E1422

CPU # machine

check error.

Power

cycle AC.

The system BIOS has
reported a machine
check error.

Remove AC power to the
system for 10 seconds and
restart the system.

If the problem persists,
see "Getting Help" on
page 169.

E1610

Power Supply #

(### W)

missing.

Check power

supply.

Specified power supply
was removed or is missing
from the system.

See "Troubleshooting
Power Supply" on
page 151.

E1614

Power Supply #

(### W) error.

Check power

supply.

Specified power supply
has failed.

See "Troubleshooting
Power Supply" on
page 151.

E1618

Predictive

failure on

Power Supply #

(### W).

Check PSU.

An over-temperature
condition or power supply
communication error has
caused the predictive
warning of an impending
power supply failure.

See "Troubleshooting
Power Supply" on
page 151.

E161C

Power Supply #

(### W) lost

AC power.

Check PSU

cables.

Specified power supply is
attached to the system,
but it has lost its
AC input.

Check the AC power
source for the specified
power supply. If the
problem persists, see
"Troubleshooting Power
Supply" on page 151.

Table 1-2.

LCD Status Messages (Optional)

(continued)

Code

Text

Causes

Corrective Actions

R310HOM.book Page 29 Thursday, March 4, 2010 1:03 AM

Summary of Contents for PowerEdge R310

















































































































































































Search results

Summary of Contents for PowerEdge R310

Reviews:

Related manuals for PowerEdge R310

Brands by name

Popular brands

Dell PowerEdge R310, Owner'S Manual

Search results

Summary of Contents for PowerEdge R310

Reviews:

Related manuals for PowerEdge R310

Brands by name

Popular brands