1. Software Installation
This chapter provides instructions for installing essential and helpful software for use in an environment where the
machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using
the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network
connected machine’s driver (see "Installing driver over the network" on page 120).
• Installation for Macintosh
110
• Reinstallation for Macintosh
112
• Installation for Linux
113
• Reinstallation for Linux
114
•
If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see
"Installing the driver locally" on page 21).
•
Only use a USB cable no longer then 3 meter (118 inches).
Summary of Contents for B1265DNF
