Wired network setup
119
2. Using a Network-Connected Machine
Find the machine’s MAC address from the
Network Configuration Report
(see "Printing a network configuration report" on page 117) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
6
Select
Apply
, then
OK
, and
OK
again.
7
Quit
Safari
.
IPv4 configuration using SetIP (Linux)
Before using the SetIP program, disable the computer firewall from
System
Preferences
or
Administrator
.
The following instructions may vary from your model or operating systems.
1
Open /
opt
/
Dell
/
mfp
/
share
/
utils
/.
2
Double-click the
SetIPApplet.html
file.
3
Click to open the TCP/IP configuration window.
4
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the
Network Configuration Report
(see "Printing a network configuration report" on page 117) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
5
The machine will automatically print the
Network Configuration
Report
.
Summary of Contents for B1265DNF
