C o n f i g u r i n g S w i t c h I n f o r m a t i o n
247
Modifying STP Port Properties:
1
Open the
STP Port Settings
page.
2
Modify the
Priority
,
Path Cost
,
Default Path Cost
, and the
Fast Link
fields.
3
Click
Apply Changes
. The STP port parameters are modified, and the device is
updated.
S T P P o r t Ta b l e P a g e
Defining STP Port Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port
parameters as displayed in the
STP Port Settings
page.
The following is an example of the CLI commands:
Console(config)# interface ethernet 1/e5
Console(config-if)# spanning-tree disable
CLI Command
Description
spanning-tree disable
Disables spanning tree on a specific port.
spanning-tree cost
cost
Configures the spanning tree port cost
for a port.
spanning-tree port-
priority priority
Configures port priority.
show spanning-tree [ethernet
interface
| port-channel
port-channel-number
]
Displays spanning tree configuration.
spanning-tree portfast
Enables PortFast mode.
