226
C o n f i g u r i n g S w i t c h I n f o r m a t i o n
www
.dell.com | support.dell.com
•
Ports cannot be configured as a destination port.
•
All packets are tagged when they are transmitted from the destination port.
The following restriction applies to ports configured as source ports:
•
If any packet is received untagged on the source port, the packet is tagged with the
default PVID of the source port when it is sent to the port mirroring destination port.
All the RX/TX packets should be monitored to the same port.
To open the
Port Mirroring
page:
•
Click
Switch > Ports > Port Mirroring
in the
Tree View
. The
Port Mirroring
page
opens.
NOTE:
When a port is set to be a target port for a port-mirroring session, all normal operations
on this port are suspended. These operations include Spanning Tree and LACP.
P o r t M i r r o r i n g P a g e
