Dell 3348 - PowerConnect Switch - Stackable, User Manual

Page: 219 / 378

C o n f i g u r i n g S w i t c h I n f o r m a t i o n
219
– Half —The interface supports transmission between the device and the client in
only one direction at a time.
• Flow Control —Indicates if Flow Control is enabled on the LAG. The possible values
are:
– Off —Disables Flow Control on the LAG. This is the default value.
– On —Enables Flow Control on the LAG.
– Auto-negotiation —Enables auto negotiation of Flow Control on the LAG.
• Current Flow Control —Indicates the current Flow Control setting. The possible
values are:
– Off
– On
– Auto-negotiation
Defining LAG parameters:
1
Open the LAG Configuration page.
2
Select a LAG in the LAG field.
3
Define the Description , Admin Status , Port Speed , Admin Auto Negotiation , Admin
Speed , and/or Admin Flow Control fields.
4
Click Apply Changes . The LAG parameters are saved to the device.
Modifying LAG parameters:
1
Open the LAG Configuration page
2
Select a LAG in the LAG field.
3
Modify the Description , Admin Status , Port Speed , Admin Auto Negotiation , Admin
Speed , and/or Admin Flow Control fields.
4
Click Apply Changes . The LAG parameters are saved to the device.
Displaying the LAG Configuration Table:
1
Open the LAG Configuration page.
2
Click Show All . The LAG Configuration Table opens.